Is this okay?
How good would the following design be for a one shot, in terms of power and what not. Just want some cheap thrills (around 300 fps) until I can get everything else I need to make something a little more complex.
Its basically a Pipe connected to a co2 pump.
Its basically a Pipe connected to a co2 pump.
- Attachments
-
- Basically a Pipe connected to a co2 pump.
- Cheap.gif (5.69 KiB) Viewed 4186 times
Last edited by kuya on Wed Dec 17, 2008 10:43 pm, edited 1 time in total.
I did do research, If you read carefully I just wanted some cheap thrills until I got all the things I needed for something more complex. Though thanks for replying.pocket wrote:.... fail y dont u do some research and find a decent piston plus itll cost way way less. not to mention there is no efficiency anywhere near there
Don't waste your money. Save it for "something more complex." Trust me, you'll be glad if you do. Unless you have all of the parts already, don't go out and buy them, since building a "more complex" gun will be much more satisfying. Besides, I don't think that will give you anywhere near 300 fps.
yeh fair enough. The reason is i do have those parts already. I just need to get the Piston Internals still. and then like have to build the piston and weld it together, since the springs gonna be stiff to allow for a large build up of pressure within the piston itself, just gonna be a while is all, and im impatient . I got it all sorted, just need parts.
- Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
I would highly suggest adding a hopup into the design.. like my Direct Feed BBMG design below:
http://www.spudfiles.com/forums/bbmg-ai ... 16151.html
http://www.spudfiles.com/forums/bbmg-ai ... 16151.html
Damn, you guys are real encouraging.
For a plinker of around 300 fps or so, might i suggest making a mini combustion or are you stuck with pneumatics? With a longer barrel, a mini can have some decent power, and you dont have to bother with all those co2 cartridges.
For a plinker of around 300 fps or so, might i suggest making a mini combustion or are you stuck with pneumatics? With a longer barrel, a mini can have some decent power, and you dont have to bother with all those co2 cartridges.
People call me ThunderChunks...I dont even know why...
Got a Gamertag?, mines KillerHedgeHog3, add me
Got a Gamertag?, mines KillerHedgeHog3, add me
- Xxplosive42o
- Specialist
- Posts: 134
- Joined: Tue Dec 09, 2008 5:57 pm
- Location: Los Angeles, Ca.
Kuya, if you want something relatively small and easy to build. Just put together a sprinkler valve pneumatic. They’re relatively cheap and extremely easy to build. You can make it as simple as you want or as complex as your imagination allows.
Cheers! 8)
Cheers! 8)
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
For a simple little plinker, its fine.. if you're feeling ambitious afterwards you can make a blow fore ward breech
http://www.spudfiles.com/forums/6mm-sem ... 10075.html
http://www.spudfiles.com/forums/6mm-sem ... 10075.html
<a href="http://www.bungie.net/stats/halo3/defau ... player=ALI H IS GREAT"><img src="http://www.bungie.net/card/halo3/ALI H IS GREAT.ashx"></a>
Im planning to make that anyway =].ALIHISGREAT wrote:For a simple little plinker, its fine.. if you're feeling ambitious afterwards you can make a blow fore ward breech
In response to Jack, I'd more of the Semi-Auto, Bolt Action and Single shot type =]. Why waste 30 ammo? When all you need is one well placed shot =]?