Can someone good help me ? please
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
how i can have that power ? he uses 6-7 bars i use 8 bars and i can even penetrate Thin wood ?
- farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
what ammunition, he has some big slugs
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
How i can have the same power? He uses 6-7 bars and he can penetrate all that , i use 8 bars and i cant even penetrate thin wood. I use 8 mm barrel and 8 mm steel balls . My pilot is air compressor gun
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
- farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
Should have good power then, you could be losing pressure through the blow gun, normally pressure goes the other way to seal.
- Anatine Duo
- Specialist
- Posts: 186
- Joined: Sat Feb 01, 2014 11:16 am
- Location: cottage country
- Has thanked: 37 times
- Been thanked: 20 times
also how snug is the projectile in the barrel?
Your pilot volume looks huge. That doesn't help.
Your pilot volume looks huge. That doesn't help.
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Agreed, try it like this and see if power improves:Anatine Duo wrote:Your pilot volume looks huge. That doesn't help.
Can the projectile roll down the barrel easily?
Do you have a system (like for example a magnet) to keep the projectile in the breech?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
This tee is for bicycle pump , no i dont have magnet , Iuse toilet paper and ball
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
Yes , the bullet is going easily , but sometimes if i wrap bullet with toilet paper its hard to push bullet into barrel and air its not pushing him
- Anatine Duo
- Specialist
- Posts: 186
- Joined: Sat Feb 01, 2014 11:16 am
- Location: cottage country
- Has thanked: 37 times
- Been thanked: 20 times
Sounds like the projectile to barrel fit is good.
If you take off the barrel, pressurize, and try to fire, what happens? A loud pop or just a hiss out the pilot?
If you take off the barrel, pressurize, and try to fire, what happens? A loud pop or just a hiss out the pilot?
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
With a proper pilot you should be good, I used a slide valve for my experiments and it popped very well.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
I can't quantify it exactly but the more pilot volume you have, the slower the valve will open and the less power you will get from your projectile.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private 4
- Posts: 70
- Joined: Thu Mar 07, 2019 12:38 pm
Have anyone other ideas to increase power please?