light bulb round
- spudy buddy
- Specialist
- Posts: 123
- Joined: Thu Nov 29, 2007 9:27 pm
i was just wondering if someone has don this but why not take a laser pointer case(fits perfectly in 1/2 pvc) take out the stuff, then get one of those little light bulbs and a AAA battery and some wire and put it together? tape the wire to on end of the battery. tape the othe end to the bulb. when the bottom of the bulb touches the battery it would light up. put the bat/bulb asembly into the case. plug one ent that will be the front. the bulb in the back as not the get damaged. screw the bulb all the way in so it makes contact with the bat. and lights up. when you shoot you should be able to see it go very far. the laser pointer case is optional. would this work and has some one done it?
- Attachments
-
- CAYJCDIV.jpg (1.59 KiB) Viewed 3837 times
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
It's been done before, and as to the bulb landing undamaged, not as easy as it sounds.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- elitesniper
- Sergeant
- Posts: 1090
- Joined: Sat Oct 13, 2007 8:40 pm
so its a tracer round? nice idea ,but seems kind of to much just to see it go.
- spudy buddy
- Specialist
- Posts: 123
- Joined: Thu Nov 29, 2007 9:27 pm
ya but it would be cool to see it shrinking off into the distance lol. even if it was inside the case?
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
If it's still lit you have a better cyhance of finding it thoughelitesniper wrote:seems kind of to much just to see it go.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Corporal 5
- Posts: 986
- Joined: Thu Jun 16, 2005 1:44 pm
- Been thanked: 1 time
That's a cool idea.
I guess i'll chalk that up next to glowstick powder for tracer round ideas.
I guess i'll chalk that up next to glowstick powder for tracer round ideas.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
Why not just use a small flat battery in combination with one or more LED's
Duct-tape it all together, fit it in a sabot or spud, and load it into the gun!
Duct-tape it all together, fit it in a sabot or spud, and load it into the gun!
Glowing rounds aren't as easy to find in the dark as you might think, if it drops behind a rock or under a bunch of leaves it's stuffed.
Putting a ribbon streamer behind your projectile is much nicer, easier to follow and you can do it in the sunshine
Putting a ribbon streamer behind your projectile is much nicer, easier to follow and you can do it in the sunshine
- Carlman
- Staff Sergeant 2
- Posts: 1618
- Joined: Sat Nov 24, 2007 1:18 am
- Location: Western Australia
- Been thanked: 2 times
i have done something similar to this but insted i used florescent LEDs (about 6) wired of a 9v stuck into a spud!
It worked great!! Streak of blue/white across the night sky
It worked great!! Streak of blue/white across the night sky
Aussie spudders unite!!
- Carlman
- Staff Sergeant 2
- Posts: 1618
- Joined: Sat Nov 24, 2007 1:18 am
- Location: Western Australia
- Been thanked: 2 times
What if you attached fishing line to your ammo whilst the fishing rod and reel was next to, flip the catch fire and reel the big 1 in lolHotwired wrote:Glowing rounds aren't as easy to find in the dark as you might think, if it drops behind a rock or under a bunch of leaves it's stuffed.
Putting a ribbon streamer behind your projectile is much nicer, easier to follow and you can do it in the sunshine
Aussie spudders unite!!
That a good idea. what about gettign a very long spool and light up the entire spool with a laser? then you get a glowing red wire that atached to the ammo. Some fishing lines act like fibre optic wires.What if you attached fishing line to your ammo
My interest on spud guns began when I couldn't legally buy guns.
Now its because my guns are too loud to legally shoot.
Its not like it was legal to being with, but they don't offer subsonic 7.62x39 or 7.62x54R. They only have subsonic .22 long. Thats no fun stuff doesn't explode.
Now its because my guns are too loud to legally shoot.
Its not like it was legal to being with, but they don't offer subsonic 7.62x39 or 7.62x54R. They only have subsonic .22 long. Thats no fun stuff doesn't explode.
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
my dad once bought a bunch of cheap chinease made lighters with an in built LED flashlight.... the whole LED & battery thing can be easily removed and I used them succesfully as tracer rounds..... I just wrapped the whole thing in transparent tape several times to make it is more durable and.... it works fine - the round can be reused
the only problem is that they can get lost easilly in vegetation when fired for max range.If the round flies too far away at night you can't really see where it lands and after it is on the ground the grass, bushes and other stuff can block the light and make retriving them difficult becasue ) so if any of you is going to try building a reusable tracer round you better fire them where there is no or little vegetation
I'll try to make a picture of this thing tommorow so that you could see how simple it is...
the only problem is that they can get lost easilly in vegetation when fired for max range.If the round flies too far away at night you can't really see where it lands and after it is on the ground the grass, bushes and other stuff can block the light and make retriving them difficult becasue ) so if any of you is going to try building a reusable tracer round you better fire them where there is no or little vegetation
I'll try to make a picture of this thing tommorow so that you could see how simple it is...
I think that the round attached to fishing line with enough for like half a mile or something. I do like the hit the fishing line with a laser light and get a red line all the way to your ammo.
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
- jimmy101
- Sergeant Major
- Posts: 3199
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 17 times
- Contact:
There are ways to hack the flash unit from a disposable camera so that the flash fires repetitively. No chance of loosing something in the shrubbery that flashes as brightly as a photoflash.
I wonder if the flash circuit will survive a couple hundred gs?
I wonder if the flash circuit will survive a couple hundred gs?