Mini Pill Bottle

spudshot · Sun Mar 12, 2006 1:02 pm

mustard oil? its usually just propane or butane

rozby · Sat Mar 18, 2006 1:26 pm

tape 2 pens together for more distance

[12:28 PM]
yea my fule is modle air brush propelent ans its propane with musturd oil and its o zone safe

NOTE FROM PIMPMANN22: Holy Sh*t youve almost broken every rule beside posting porn... Were not a bunch of enviromentalist wack jobs that have spaz attacks everytime someone squirts a aersol can. So for me at least I dont care if its o zone safe.

PotatoPirate · Sat Mar 18, 2006 10:54 pm

What do you use for your igniter?

)DEMON( · Sun Mar 19, 2006 12:48 am

seeing is the thing is so small you could easily use one of those clicky shocky things from a lighter

PotatoPirate · Tue Mar 21, 2006 7:29 pm

hey just to let you all know don't use a milk jug because they are not thick enough to withstand the pressure. I just did that so know i am inside. I burned one of my fingernails almost completly off and burned three of my other fingers. stick with thick plastic.

Andrew52 · Tue Mar 21, 2006 7:43 pm

oh he's not a nube you need wires but one on each little thing on the side of the piezo you can hook them to screws thumbtacks or even the wires work just stik them in no more bulge its nice thats what i did on mine

_Hell_Storm_ · Wed Mar 22, 2006 12:02 pm

i made 1 simalar to this here is a site i made on hoiw to make 1 i adde d ahandle on mine it is powerful uysed a pill bottle: http://www.freewebs.com/micro-gun/

MisterSteve124 · Mon Apr 10, 2006 6:40 pm

just get two wires and attach one end of each of them to the lighter or igniter and the other to the screws and just glue it and put tape around it. Make sure you use a sturdy bottle with a good threaded cap. My cap flew of today and hit me in the leg. I have a huge bruise now.

Clandest1n3 · Thu Apr 13, 2006 1:50 am

will hot glue work?

Clandest1n3 · Thu Apr 13, 2006 3:09 am

i just made one of these but im having problems getting it to ignite the fuel im using axe which i know is a good propellant but i cannot get it to ignite its got a igniter from a torch lighter on it

plumpthumb · Thu Apr 13, 2006 3:39 pm

Use epoxy-it makes a good solid weld. As far as not firing try this-give it a short shot of fuel and then, holding it by the barrel, slowly wave it back and forth two or three times-kinda like waving at someone you really don't to see. Put the cap on and fire!

Clandest1n3 · Thu Apr 13, 2006 5:38 pm

thanks for the advice about the waving it back an forth a little bit it works great now

madjohn_7 · Sun Jun 04, 2006 2:03 pm

hey im making my first mini pill canaon but im having problums making the sparker

theonecomplicant · Fri Jul 21, 2006 10:43 pm

I just made one on a whim and then decided to look on the web and found this page. I don't know if anyone has thought/said it yet but try using propane as a propellent, it's what I use and i've found that you never have to worry about gas/air mixture. I just a propane torch that you have to manually light by turning the gas on and then sparking it... try it.

PS. Try shaving a jelly belly and then shaping it into a bullet... you will be amazed.

Use hot glue to fasten/insulate things to the pill bottle and then silicone adhesive over top of that but I am sure you can you the silicone adhesive alone.

Benny · Sat Jul 22, 2006 12:17 am

Clandest1n3 wrote:will hot glue work?

Yes, and Madjohn, WTF? you dont make the ignighter, you pull it out of an old long nose lighter.