Cheap CO2 regulator
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
Wondering where i can get a co2 reg. (20 oz or 12g) for $30 or under. PLS Help! (wont be home till eight dont expect a reply till then sry)
THANKS
THANKS
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
well i was thinking mabe a 12 gram around $10
- bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
But with the 12 grams you will mabey get 1 chamber fill too 100psi if you have a small enough chamber. I don't have any experience with regulated co2 but you diffenetly should go with a paintball tank and spend the $60-$70 on a reg for that because they cost like a dollar to fill and you can get a decent amount of shots off them.Or you could even more preferably get a bulk co2 tank and reg but that is really expensive.
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
thanks!!:D but it will have to wait, i have to save money for a car. Does anyone know a formula to figure out how many fills a 20oz CO2 tank will fill
an air chamber 2 a certain psi
THANKS
an air chamber 2 a certain psi
THANKS
It's more like $3-5 to fill a 20oz CO2 tank...bigbob12345 wrote:But with the 12 grams you will mabey get 1 chamber fill too 100psi if you have a small enough chamber. I don't have any experience with regulated co2 but you diffenetly should go with a paintball tank and spend the $60-$70 on a reg for that because they cost like a dollar to fill and you can get a decent amount of shots off them.Or you could even more preferably get a bulk co2 tank and reg but that is really expensive.
You can get a good regulator for about $50-80.... The better end being around $75...
When working with CO2, a blow-out safety valve is almost necessary.... If your reg blows, you have 800-3000 psi rushing in PVC pipe... not good to say at least.
A 20oz tank should be $20 or less... One with an On\Off valve would be easier to use...
-FrOgY-
I wish people would stop needing a better signature!
I wish people would stop needing a better signature!
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
Thanks
Does anyone know a formula to figure out how many fills a 20oz CO2 tank will fill
an air chamber 2 a certain psi
Does anyone know a formula to figure out how many fills a 20oz CO2 tank will fill
an air chamber 2 a certain psi
- Carlman
- Staff Sergeant 2
- Posts: 1618
- Joined: Sat Nov 24, 2007 1:18 am
- Location: Western Australia
- Been thanked: 2 times
"how much c02 do i need"
http://www.spudfiles.com/forums/how-muc ... t7133.html
http://www.spudfiles.com/forums/how-muc ... t7133.html
Aussie spudders unite!!
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
The best you can hope for, is that you will find a table that shows how much room CO2 gas takes up at 100psi at a certain temperature, then you need to find out the volume of the 20oz tank, compared to your chamber and work out how many times it will fill to that PSI.
Edit: Beaten, that's exactly what you need.
Edit: Beaten, that's exactly what you need.
well maxfreak, beacuse your a cannon noob, it will depend on how big your chamber is. therefore if you find out how big your chaber is in ounces. for example, say your chamber can hold one ounce of air at 1psi, just multiply and youll be able to figure it out
- bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
Really for me at a paintball store it costs a dollar.frogy wrote:
Its more like $3-5 to fill a 20oz CO2tank
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
but doesn't co2's liquid characteristics change the gas storing capability's thus making the equation inadequate for the job specified. For example a 20oz co2 canister can hold 20oz's of liquid co2 but **oz of gas :tongue3:
Last edited by maxfreke88 on Fri Jan 18, 2008 11:20 pm, edited 1 time in total.
- maxfreke88
- Private 2
- Posts: 33
- Joined: Sat Jan 12, 2008 5:55 pm
- Location: Mass
had to dig out the dictionary for that one :tard: