so while i was waiting for some parts PLAUGE and my QEV+popoff and i was bored and that the hardware store so i desided to spend a little cash and make a little ball valve paintball plinker. this cost me like $25 (i already had the 3/4in ball valve) so i got what i paid for. but while at the hardware store again yesterday and saw some pvc unions. so after $15 and about 20minutes(that 20minuts included the trip to the store) i had a extremly powerful cannon now.
for a barrel i have 48inches of 1/2in sdr 13.5 and a chamber of 1 1/2in by 24in. to hold the burstdisks i have 2 sch80 3/4inch threaded and a 1/4inch ball valve to vent the piolet area
i use blue painters tape as a burst disk and on the chamber side burstdisk i also but in a layer of wax paper so add just a little strength it.
if fill the piolet area to 50psi and the rest of the gun to 80psi, this gives me a fire every time (almost. sometimes the tape is a little stronger and takes more pressure)
now the pics!
hole gun
chamber and valve section
and the burst disk holder section
i know this is my first completed gun but i am calling it my third because it was started last
BTW at 80 psi it is too powerfull and bursts paintballs in the barrel. i am currently looking for some stronger ammo to shoot so if you have any suggestions they would be appeciated. and yes i have thought of potatoes
damage pics and a vid will come after i freeze some paintballs or find better ammo
UPGRADE:
yes i did upgrade this after only having it for 1 day.
i redid the burstdisk section to fix some leaks, make it more comfortable to hold, and made it safer
triggered burstdisk paintball cannon
-
- Specialist 2
- Posts: 213
- Joined: Tue May 06, 2008 10:43 pm
hmm.. interesting.
I'm not a fan of burst disks, but i'm liking this one.
Try batteries, rocks, marbles, etc. And maybe get some damage pics.
I'm not a fan of burst disks, but i'm liking this one.
Try batteries, rocks, marbles, etc. And maybe get some damage pics.
"I'm spending time without a gender for tax reasons. It's great if I get hit in the groin, but a total nightmare in the bathroom."
-Rag
Obsequium parit amicos; veritas parit odium.
-Cicero
-Rag
Obsequium parit amicos; veritas parit odium.
-Cicero
thanks for the ammo ideas. i will try some soon and post the results.
i am thinking of making a how to for this becuase it is extremly powerful and easy to build, not to mention cheap.
@thedeathofall
have you ever tried burstdisks? because they are FREAKING AMAZING! the reload speed is slow but the power is awesome. like i said in the OP it bursts paintballs at only 80psi. i am kind of scared to take it to 150psi...
@rp181
batteries, yes. rebar is probalby a no because it would be a little heavy
also ggdt says that if the paintball stayed intact that it could go 650fps+ at only 80psi
i am thinking of making a how to for this becuase it is extremly powerful and easy to build, not to mention cheap.
@thedeathofall
have you ever tried burstdisks? because they are FREAKING AMAZING! the reload speed is slow but the power is awesome. like i said in the OP it bursts paintballs at only 80psi. i am kind of scared to take it to 150psi...
@rp181
batteries, yes. rebar is probalby a no because it would be a little heavy
also ggdt says that if the paintball stayed intact that it could go 650fps+ at only 80psi
Try freezing the paintballs that should keep them intact. Try glass marbles used in slingshots they are a beautiful thing to shoot.
Just a paint job and your set
Also nice construction minimal staining = GOOD
-nicely done filling method and appears easy and fast to fill
Just a paint job and your set
Also nice construction minimal staining = GOOD
-nicely done filling method and appears easy and fast to fill
Note epoxy cure time very important barrels are hard to remove from the wall
-
- Specialist 2
- Posts: 213
- Joined: Tue May 06, 2008 10:43 pm
nope i have never tried them. I know they are easy to make and all, but i just haven't ever felt the urge.
"I'm spending time without a gender for tax reasons. It's great if I get hit in the groin, but a total nightmare in the bathroom."
-Rag
Obsequium parit amicos; veritas parit odium.
-Cicero
-Rag
Obsequium parit amicos; veritas parit odium.
-Cicero
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
I like some damage pics would be appreciated
On a small side note, is PLAUGE an acronym? Because if you meant to say PLAGUE then the typo is really annoying to the eyes
On a small side note, is PLAUGE an acronym? Because if you meant to say PLAGUE then the typo is really annoying to the eyes
like i said damage pics will come soon. stupid freezer can only freeze so fast
and crap... i have been spelling it wrong all this time...
150psi should prove to be quite intresting. not to mention extremly loud.
i have not tried firing without a barrel yet but i imagie it would be similar to my friends semi-advanced spray and pray (just a little higher pitched)
and crap... i have been spelling it wrong all this time...
150psi should prove to be quite intresting. not to mention extremly loud.
i have not tried firing without a barrel yet but i imagie it would be similar to my friends semi-advanced spray and pray (just a little higher pitched)
Freezing paintballs is a pointless endeavor, they don't get harder they get brittle. http://www.youtube.com/watch?v=yyXXXCC3B0E
I would try some dowel slugs.
I would try some dowel slugs.