Ok, just clearing it up. Thanks.Ragnarok wrote:Not in the slightest - more the opposite.
You could easily build much more powerful things, but you don't. Hence, you're (probably) not the kind of power fiend they should be looking to appeal to.
Superna- 2" Piston Valved Golf Ball Gun WITH DAMAGE
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 7 times
Rag, you keep referring to people who want to build hybrids like they are not part of the community, but more like outcast who have to draw power hungry maniacs away from actual spudding.
And on topic,
I see I missed that, but it looks like you still need higher fill flow for decent ROF
And on topic,
I see I missed that, but it looks like you still need higher fill flow for decent ROF
I love lamp
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
He was throttling the fill rate with the small ball valve. I think he was trying to reduce the amount of air lost while the piston and sprinkler valve recovered.
Without a ball valve, the Marshmallow Cannon has a good ROF. It does not take long to re-close it after a shot. My little compressor simply does not keep up.
Without a ball valve, the Marshmallow Cannon has a good ROF. It does not take long to re-close it after a shot. My little compressor simply does not keep up.
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
In his defence, SOME PEOPLE tend to think that anybody who doesn't have a hybrid is inferior and that they need to build one and it is very obvious. YOU KNOW WHO YOU ARE and seriously, tone it down....Lockednloaded wrote:Rag, you keep referring to people who want to build hybrids like they are not part of the community, but more like outcast who have to draw power hungry maniacs away from actual spudding.
The ball valve wasn't opened all the way, but I think it can fill fast enough for a shot every second, which is fine. You have to aim after each shot so a faster ROF is not nessecary.And on topic,
I see I missed that, but it looks like you still need higher fill flow for decent ROF
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
You nailed it. Plus, I wasn't testing how fast of an ROF I could get. Maybe I'll do that tomorrow.Technician1002 wrote:He was throttling the fill rate with the small ball valve. I think he was trying to reduce the amount of air lost while the piston and sprinkler valve recovered.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Thu Jul 15, 2021 1:43 am, edited 1 time in total.
@Lockednloaded: Yes, exactly. I was also told something about the general size of the anatomy of hybrid fetishists, but the pink elephant is looking at me very threateningly, so I think I'd better not repeat it.
More seriously, I don't see why you feel that you need to peddle hybrids. The kind of people you're telling are fully aware of the power potential and can decide if they're interested on their own - so the endless parroting of hybrid supremacy is only going to annoy people.
Also, what else am I supposed to think of your "recruitment methods" when your weapon of choice is popping up in the thread of a launcher that really doesn't need hybridisation?
If you're going to make suggestions for improvements, make them relevant to what the launcher is trying to do.
More seriously, I don't see why you feel that you need to peddle hybrids. The kind of people you're telling are fully aware of the power potential and can decide if they're interested on their own - so the endless parroting of hybrid supremacy is only going to annoy people.
Also, what else am I supposed to think of your "recruitment methods" when your weapon of choice is popping up in the thread of a launcher that really doesn't need hybridisation?
If you're going to make suggestions for improvements, make them relevant to what the launcher is trying to do.
Does that thing kinda look like a big cat to you?
- velocity3x
- Corporal 4
- Posts: 828
- Joined: Fri Jun 05, 2009 3:09 pm
- Location: Yuma, Arizona
- Contact:
Lockednloaded wrote: for even more compactness, power, and straight up cool factor a hybrid is the only way to go from here.
The only way to go from here?
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 7 times
I've made many relevant comments, and this may be the very first time I have ever made a comment about hybrids to another member who is not interested at the time. You can't make an entire generalization about someone based on a harmless suggestion.
I only suggest this because GF has built an array of pneumatics and has access to proper hybrid building materials.
And on topic:
Sorry, I see what you were doing with the valve now. Maybe a gauge needs to be installed to show when maximum pressure is reached so shots are consistent
I only suggest this because GF has built an array of pneumatics and has access to proper hybrid building materials.
And on topic:
Sorry, I see what you were doing with the valve now. Maybe a gauge needs to be installed to show when maximum pressure is reached so shots are consistent
I love lamp
- velocity3x
- Corporal 4
- Posts: 828
- Joined: Fri Jun 05, 2009 3:09 pm
- Location: Yuma, Arizona
- Contact:
Double post
Maybe, but I've seen hybrid pedlars all over the place, and reading a recycled "pneumatic dead end" speech or its equivalent for the eleventeenth time does get a mite wearing.Lockednloaded wrote:This may be the very first time I have ever made a comment about hybrids to another member who is not interested at the time.
Does that thing kinda look like a big cat to you?
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Thu Jul 15, 2021 1:43 am, edited 1 time in total.
- Lockednloaded
- Staff Sergeant
- Posts: 1566
- Joined: Thu Sep 03, 2009 9:38 pm
- Location: Texas, USA
- Been thanked: 7 times
Hypocritical much? So many of your posts on others cannons directly link to HEAL, and how awesome it is. I don't think you need to be lecturing me about ONE playful suggestion.Ragnarok wrote:Also, what else am I supposed to think of your "recruitment methods" when your weapon of choice is popping up in the thread of a launcher that really doesn't need hybridisation?
It's not like I'm spamming the site telling people "BUILD A HYBRID NOOB" on every thread, and I am sure not bragging about my hybrid, so what makes a simple suggestion so bad? Its a community where people are free to express their own opinions, and if you think that makes me some sort of "Supremacist", then you really don't have much of a place hereRagnarok wrote: More seriously, I don't see why you feel that you need to peddle hybrids. The kind of people you're telling are fully aware of the power potential and can decide if they're interested on their own - so the endless parroting of hybrid supremacy is only going to annoy people.
I love lamp
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
A general word to the wise.. Sorry for the off topic post.. Don't let this become a flame war and raise the wrath of the mods..
The thread topic is 2 inch Piston Valve Golf ball gun. Hybrid discussion and their merits should be in the combustion section under hybrids.
Back on topic, The videos are great. Have you tried higher pressure? I like the idea of the 1/2 tennis ball. I may try one to see how well it holds up.
Do you think the force on the piston will become too strong for the bumper when the pressure is higher and a barrel and projectile is used?
The thread topic is 2 inch Piston Valve Golf ball gun. Hybrid discussion and their merits should be in the combustion section under hybrids.
Back on topic, The videos are great. Have you tried higher pressure? I like the idea of the 1/2 tennis ball. I may try one to see how well it holds up.
Do you think the force on the piston will become too strong for the bumper when the pressure is higher and a barrel and projectile is used?
Not really. In the last year, go and count how many posts where I've mentioned HEAL for the basis of hyping it, rather than for any relevant purpose (perhaps as an example for the sake of discussion, say). The number is evidently less than you think it is.Lockednloaded wrote:Hypocritical much?
And my opinion is that, while discussions of the merits of hybrids are all well and good, they should be at least a little more relevant to the discussion at hand.Its a community where people are free to express their own opinions, and if you think that makes me some sort of "Supremacist", then you really don't have much of a place here.
Also, see "Hyperbole".
Why exactly? You might as well tell me that this is a hopeless dead end, with no chance of standing up to modern designs in practicality or performance - it won't stop me liking it.SpudBlaster15 wrote:That's only because it's painful for pneumatic enthusiasts such as yourself to admit the validity of such statements.
Does that thing kinda look like a big cat to you?