personally, make the slots with something else, then finish with a file. Or get an end mill and use that in the drill press. You need to cut on the side, and drill bits aren't meant for that.
a solid carbide one would flex the least.
If not, DEEP center drills, pilot drill, then drill to size. If possible, retain some meat so that it's not a finished slit and remove that later. It should help with the bending of the drill.
clamp it tight, and minimize quill extension.
drill press tips
I have the drawings done.
Just have to convert to some useable format for you to print out accurately.
Do you have Sketchup or e-drawings viewer?
If you do, it will be more accurate than bmp, jpeg or png file conversions.
Just have to convert to some useable format for you to print out accurately.
Do you have Sketchup or e-drawings viewer?
If you do, it will be more accurate than bmp, jpeg or png file conversions.
-
motorfixer1
- Private 4
- Posts: 91
- Joined: Wed Jul 07, 2010 5:28 pm
A single ended HSS 4 flute endmill works great for this job even if you don't have a mill. Might be on the pricey side but you don't need a high quality one, just one with a same size shank. High speeds and light feeds. Aluminum should be a piece of cake to do this to even for a novice.
I finshed drilling 2 month and 4 hours ago so it dosent matter i than powder coated the aluminum and it looks great also alot of people dont apreciate when you post in a dead topicOxbreath wrote:Why are you drilling those ?
Just use a hacksaw and then a round file.
dont play with airsofter with 1000$ gun and play with a 5 dollar pair of glasses
-You- finished drilling 2 months and 4 hours ago.twizi wrote: I finshed drilling 2 month and 4 hours ago so it dosent matter i than powder coated the aluminum and it looks great also alot of people dont apreciate when you post in a dead topic
Someone else might find this thread in a search, and appreciate an easier way to get those slots cut in the barrel.
No one minds if a 'dead topic' is posted to... If something constructive is posted.
If you can't fix it, you don't own it.
So why not show some pictures of the end result?twizi wrote: I finshed drilling 2 month and 4 hours ago so it dosent matter i than powder coated the aluminum and it looks great also alot of people dont apreciate when you post in a dead topic
Ask for help and you get it, but no results from you to show others that it is possible.
I was about to revive your 'dead topic" anyway to get an answer.