Lathes.
It's very small. The longest thing you could turn and still have the tailstock on the lathe is around 5 inches. The combined length of the workpiece and any drills would be about 4 inches. I have a 14" lathe, and I STILL struggle with my Jobber length drill set.
Save up, and look on the used market. I got my 7x14 RealBull for $460, including a bunch of tooling. I got my Enco RF45 clone mill for $860, including a bunch of tools, a $380 rotary table, and a ~$100 vise.
As to building one, if you can cast (or maybe weld) it shouldn't be *that* hard, especially if you have a drill press. It should be relatively easy if you have a friend with access to a bigger lathe and, more importantly, a mill.
It will be time consuming, though. Generally, you weld together a temporary headstock, and use it to bore the cast (or heavier) headstock for its bearings.
Save up, and look on the used market. I got my 7x14 RealBull for $460, including a bunch of tooling. I got my Enco RF45 clone mill for $860, including a bunch of tools, a $380 rotary table, and a ~$100 vise.
As to building one, if you can cast (or maybe weld) it shouldn't be *that* hard, especially if you have a drill press. It should be relatively easy if you have a friend with access to a bigger lathe and, more importantly, a mill.
It will be time consuming, though. Generally, you weld together a temporary headstock, and use it to bore the cast (or heavier) headstock for its bearings.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
I have a friend who has a giant lathe, maybe 8' long, and he rarely uses it. I may be able to use it at his house some time until I get my own lathe. Whats a good mini lathe? And a cheapish one (money wise)...
http://www.mini-lathe.com/mini_lathe/ve ... her_7x.htm
There's a navigation bar at the botton for the more "regular" versions. Keep an eye on craigslist for an old Rockwell or Southbend or something. Those are much more rigid, but might require some fixing up. (so will the above Chinese imports)
IMHO, Sherline lathes are only really good for very small parts.
There's a navigation bar at the botton for the more "regular" versions. Keep an eye on craigslist for an old Rockwell or Southbend or something. Those are much more rigid, but might require some fixing up. (so will the above Chinese imports)
IMHO, Sherline lathes are only really good for very small parts.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
warhead, realistically, do you have at least $500 to spend? Otherwise all this discussion is purely academic 
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
She said she would prefer I get a lathe then continue on with the cannon building... Mostly because I said it was also very math intensive (which it kinda is) and that it would help me with my math...
Jack, I do, but I don't. Know what I am saying?
Jack, I do, but I don't. Know what I am saying?
-
LovableAirGuns
- Specialist 2
- Posts: 267
- Joined: Tue Sep 28, 2010 5:58 am
If your looking for a lathe look for a hercus or a Sheraton they are Australian made metal lathes and they are clones of Southend, just recently i got offered and free Sheraton conquest lathe but i just need to build it. 
go for something with a decent centre point and swing because if you buy some thing small and start to work with bigger materials you will be sorry.
go for something with a decent centre point and swing because if you buy some thing small and start to work with bigger materials you will be sorry.
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Ok, I may be able to see about my brother getting me one from Australia. Thats where he lives right now so I might be able to get one from there, but shipping will be a pain in the ass...
-
3VIL G3NIUS
- Private 3
- Posts: 41
- Joined: Wed May 25, 2011 2:35 am
From the states to New Zealand 2 30kg subwoofers was going to cost me several hundred US dollars in shipping. I flagged that for local second hand ones.irisher wrote:I would not try to ship something that large transcontinental. Have you checked Ebay/Craigslist/classified ads?
You'd spend more on shipping the lathe than on the lathe itself.
Are you still at school or whatever? Is there a metal work class?
Provided you've done all your work (not hard for me considering how slow everyone else in the class is, apart from 2 friends) and you have a nice teacher you can generally make stuff for yourself if you provide/pay for materials.
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
3VIL, I wish I was for that reason. I am actually home schooled... Irisher, I know it will probably cost a alot, but if he can get one over there for like $25 usd, then I think it would be worth it, especially if its a mini.
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Like I said, I do but I don't. I kind of want an xbox, but at the same time I want a lathe. Its 50/50 for me, because I can either get really good at video games which will lead no where but alot of online glory, or get really good at machining which will lead to possibly a job and glory of being able to produce fine products.
My next newbie question, whats the difference between a metal and a wood lathe?
My next newbie question, whats the difference between a metal and a wood lathe?