ok thx man
.25 Air rifle, Breech loaded, rifled barrel
What's is a slide valve, and how does it work in relation with a QEV. What type of slide valve do i get to work with this: http://www.ebay.com.au/itm/Pneumatic-3- ... 231272a898
My air supply will come from a 50mm galvanized steel pipe (as a stock)
My air supply will come from a 50mm galvanized steel pipe (as a stock)
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Basically something like this:jazzman56 wrote:What's is a slide valve, and how does it work in relation with a QEV.
When the valve is in the forward position, it allows air to flow from the main supply to the QEV and fill the pilot and firing chamber.
When the valve is in the rear position, two things happen:
- main supply is cut off
- QEV pilot chamber is open to the atmosphere, emptying it and firing the launcher
The valve goes back to the forward position (you need to add a spring or do it manually) and the cycle can be repeated.
Here's a nice 3/4" slide valve: http://cgi.ebay.com/Deltrol-SL35-3-4-Sl ... 2eb4b3739c
You could also get a cheaper 1/8" one and use an adapter: http://cgi.ebay.com/New-Paintball-Gun-S ... 2c5cefe367
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private
- Posts: 5
- Joined: Fri Feb 15, 2008 1:28 am
hey mate, love the design on it
I'm from Australia too, got myself a soda stream canister and I machined a hammer valve too, but what I wanna ask is where the heck do you get .25 steel tubing?
I'm from Australia too, got myself a soda stream canister and I machined a hammer valve too, but what I wanna ask is where the heck do you get .25 steel tubing?
I don't know about steel, a steel supplier would be the way I'd go, but for brass and aluminium tubing I'd go to a hobby shop or Toyworld. I won't be buying 4.5mm ID aluminium for a while since I picked up 15 meters for $15.cacob_jlarke wrote:But what I wanna ask is where the heck do you get .25 steel tubing?
Can I ask what state you're in?
/sarcasm, /hyperbole
-
- Private
- Posts: 5
- Joined: Fri Feb 15, 2008 1:28 am
yeah there isn't too much to offer here
N.S.W Newcastle
N.S.W Newcastle
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
Why not add a loading mechanism there ??
w8 a sec. got to use MSpaint
w8 a sec. got to use MSpaint
- Attachments
-
- I didn't have patience to modify that one i made a new one:
a coaxial pnuematic - valve&loadingmech.PNG (8.12 KiB) Viewed 3305 times
- I didn't have patience to modify that one i made a new one:
Children are the future
unless we stop them now
unless we stop them now