Semi-auto .402 cal work in progress
Well just tested it with a CO2 cartridge and the original piston... worked fine, no leaks. So all thats left is to make a body for this, and eventually a magazine.
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Told you 
a few people laughed a few people cried most people were silent i remembered the line from the hindu scripture
a few people laughed a few people cried most people were silent i remembered the line from the hindu scripturehectmarr wrote:You have to make many weapons, because this field is long and short life
haha. indeed you did o wise JSR.
cuz i can't resist the urge of shooting something, took a few shots while it was at max power, even though it was a 3/8" bearing, so there was considerable blow by. At 10 feet or so, managed to penetrate a 1/4" into a 1" particle board. So hopefully when I make an airtight projectile, power will be better.
cuz i can't resist the urge of shooting something, took a few shots while it was at max power, even though it was a 3/8" bearing, so there was considerable blow by. At 10 feet or so, managed to penetrate a 1/4" into a 1" particle board. So hopefully when I make an airtight projectile, power will be better.
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
Started making actual projectiles today..
I'm sorry for the terrible quality of the picture I couldn't get it to focus on it to save my life.
It's pretty basic, just a short section of the barrel is lubed up, the ball bearing is dropped in and epoxy is poured into it.
Haven't test fired it yet, but it should give a good airtight seal and will be pretty easy to feed via magazine eventually.
I'm sorry for the terrible quality of the picture I couldn't get it to focus on it to save my life.
It's pretty basic, just a short section of the barrel is lubed up, the ball bearing is dropped in and epoxy is poured into it.
Haven't test fired it yet, but it should give a good airtight seal and will be pretty easy to feed via magazine eventually.
- Attachments
-
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Looks good I'd be concerned about the BB breaking off on firing though if you haven't roughened the adhering surface.
I'd be concerned about the BB breaking off on firing though if you haven't roughened the adhering surface.hectmarr wrote:You have to make many weapons, because this field is long and short life
it just broke off before even firing... so I will have to roughen the adhering surface of the Ball bearing for the next one.
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
-
inonickname
- First Sergeant 4
- Posts: 2606
- Joined: Sun Dec 07, 2008 3:27 am
I'd really rough it up..drill a hole if you can.. bastard cut file/grinder as well
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
... or just avoid using BBs altogether 
hectmarr wrote:You have to make many weapons, because this field is long and short life