Will This Work?
It should. There's just two words of advice:
1) Make sure you're not using a venting regulator. These essentially include an overpressure valve in them and, placed in the pilot area like that is, could potentially trigger the valve. Needless to say, that's not safe.
2) You need to work out how you're loading the thing to make decent use of an on-board air supply.
1) Make sure you're not using a venting regulator. These essentially include an overpressure valve in them and, placed in the pilot area like that is, could potentially trigger the valve. Needless to say, that's not safe.
2) You need to work out how you're loading the thing to make decent use of an on-board air supply.
Does that thing kinda look like a big cat to you?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Where can I buy me one of those awesome firering chambers 
Seriously though, you should use a three way valve instead of a blowgun.
Seriously though, you should use a three way valve instead of a blowgun.
hectmarr wrote:You have to make many weapons, because this field is long and short life
one thing you could have a paintball tank attached to it and still have it regulated down lower to 30 or 40 psi, and i think some pvc will hold 200 psi.
when life gives you lemons... make root beer and leave the world wondering how you did that
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
How big is your main tank?Andrew_J wrote:How many effective shot would I get out of it using a nerf bullet
How big is your firering chamber?
What pressure does the regulator output?
hectmarr wrote:You have to make many weapons, because this field is long and short life
How big is your main tank? 138 sq inchesjackssmirkingrevenge wrote:Andrew_J wrote:How many effective shot would I get out of it using a nerf bullet
How big is your firering chamber? 37 sq inches
What pressure does the regulator output? 15 - 25 psi
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
About 15 shots at 20 psi output from a 100 psi main chamberererer.Andrew_J wrote:How big is your main tank? 138 sq (cubic...) inches
How big is your firering chamber? 37 sq (cubic!) inches
What pressure does the regulator output? 15 - 25 psi
37 cubic inches sounds far too big for shooting Nerf darts though, have you tried modelling your idea in GGDT?
http://www.thehalls-in-bfe.com/GGDT/
With a three way valve like a slide valve as a pilot, you can shoot semi-auto!
[youtube][/youtube]
Details here: http://www.spudfiles.com/how-to-databas ... 23626.html
hectmarr wrote:You have to make many weapons, because this field is long and short life
I have not yet modelled my design yet, so I don't really know what the dimensions should be. i want to be able to move the gun around easy.
Thanks for the designing website (ggdt) i have never heard it before.
Thanks for the designing website (ggdt) i have never heard it before.
Last edited by jrrdw on Sun Nov 17, 2013 6:49 am, edited 1 time in total.
Reason: Double posting.
Reason: Double posting.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Not with a bit of imaginationAndrew_J wrote:Using a slide valve would work better but it would take the gun like effect out of it
here is a ghetto interpretation:
hectmarr wrote:You have to make many weapons, because this field is long and short life
I don't know if there is other type of slide valve but with the common available one with that design you will be pushing the trigger than pull it. You should move the valve near the qev to have forward direction, except you want to add more mechanical to the trigger.
honey,.. for my next birthday, a lot of epoxy will be enough as the present