Fly-K mortar - "captive piston" variation

A place for general potato gun questions and discussions.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Mar 16, 2011 2:15 am

Rheinmetall's Fly-K mortar operates on the same spigot mortar principle as much earlier weapons like the PIAThowever it marries the idea with the captive piston principle to provide a relatively quiet shot:

Image

With some imagination I think the idea has potential for spudgun applications, something like this:
Attachments
spudrocketcaptivepiston.gif
spudrocketcaptivepiston.gif (10.34 KiB) Viewed 36543 times
Last edited by jackssmirkingrevenge on Thu Mar 17, 2011 1:50 am, edited 2 times in total.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Hotwired
First Sergeant 3
First Sergeant 3
Posts: 2599
Joined: Fri Oct 13, 2006 5:51 am
Location: UK

Wed Mar 16, 2011 9:59 am

Also means more weight to carry if the projectile is taking the gas trap with it.

Depends how quiet you want to be.

Certainly a dam sight quieter than my last musings on hybrid launching which was literally launching an open chamber: http://www.spudfiles.com/forums/hybrid- ... t6559.html
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Mar 16, 2011 1:36 pm

Hotwired wrote:Also means more weight to carry if the projectile is taking the gas trap with it.

Depends how quiet you want to be.
It could be a good project for those with wide open areas to launch over, I certainly don't have the space :roll: I would envisage a parachute and camera...
Had you actually built that?
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Hotwired
First Sergeant 3
First Sergeant 3
Posts: 2599
Joined: Fri Oct 13, 2006 5:51 am
Location: UK

Wed Mar 16, 2011 4:49 pm

Nope.

But going on differences between a closed chamber and having a hollow chamber directing blast back at you. I'd still stand by it being a lot quieter :P
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Thu Mar 17, 2011 1:48 am

Hotwired wrote:But going on differences between a closed chamber and having a hollow chamber directing blast back at you. I'd still stand by it being a lot quieter :P
Indeed.

The Armbrust also uses the captive piston concept, however this time with two pistons travelling in opposite directions, one firing the projectile while the other fires a plastic countermass of the same weight.

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Thu Sep 13, 2012 8:19 am

Another interesting "real world" example of the principle, the "Bigot" designed to be fired from a 0.45" pistol:
Attachments
liberatorwithbigotprojectile.jpg
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sat Oct 17, 2020 11:02 am

Came across this prototype, looks like the principle is still being examined for hand-held weaponry:



source video

https://www.ploughshareinnovations.com/ ... mmunition/

edit: more here: https://ndiastorage.blob.core.usgovclou ... t19185.pdf

Image

Image

Image

https://accurate-mag.com/case-telescopi ... l-systems/
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Tue Oct 20, 2020 11:42 am

I like the system, I did not know it.
I have a kind of "grenade launcher" that works with a rupture disc, but it is not exactly like the drawing. The projectile is simply housed in the firing barrel. It is an ancient weapon that I built, that I adapted for this purpose. The "cartridge" that houses the o'ring and the rupture disk has no ammunition, and I only use the gases generated at 8X, to propel the self-built projectile, which is hollow. I increased the amount of air, because you need more air to decently throw the projectile. It is a plastic container, about 15 ml, with three fins and a hard aluminum tip. It weighs about 10 grams. I have tried to increase the weight by adding a little lead to the nose, but it seems to be a lot for the little base, and sometimes it inflates it. Besides, the roar is deafening and the ammo is damaged when it hits any target. I have left it at 10 grams and I shoot it against a thick fabric where it does not get damaged. One of the most fun weapons to shoot. I'll add some photos this afternoon.
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Tue Oct 20, 2020 12:20 pm

This is. I know it is not the same because the weapon has a firing barrel, but it has something to do with it, I think.
Attachments
LG 1.JPG
LG 2.JPG
Granada 2.JPG
Lanza granadas.png
Lanza granadas.png (2.46 KiB) Viewed 31380 times
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Oct 21, 2020 6:38 am

Haha very nice :)
I increased the amount of air, because you need more air to decently throw the projectile.
That is usually the issue with this type of setup, a lot of dead volume and small surface for the pressure to act on vis a vis the projectile diameter. Still, it looks like it would be fun!
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Wed Oct 21, 2020 10:34 am

Air at atmospheric pressure within the barrel and projectile appears to act like an elastic. The gases of the combustion chamber compress this air and only then the ammunition survives, and the shot is observed smoother. The air inside the projectile where the force of the compressed air is exerted is about 3.8 cm2. The projectile fits very tightly inside the barrel, so that almost no air can escape.
I have tried placing the projectile 10mm from the rupture disk, and the projectile takes a sharp hit, and appears to fly less. I am burning 10 cm3 of butane and the amount of air in the mixture is about 200 cm3.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sat Nov 25, 2023 4:02 pm



Something relevant to the original post, an animation I had made of the Russian 2B25 "silent" mortar that works on a principle similar to the Fly-K
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Sun Nov 26, 2023 5:08 pm

Nice launching system!! The Diesel hammer came to mind. I imagine that it would be impossible due to the weight of the ammunition necessary to achieve the compression necessary to achieve self-ignition of an air-fuel mixture. My inspiring system! ;)
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 37 times
Been thanked: 20 times

Tue Dec 19, 2023 10:20 am

Fun stuff... when I try to design along these lines I end up returning to crossbows though.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Tue Dec 19, 2023 12:33 pm

That's basically what they are, catapults where the power comes from something other than torsion.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply