Air Delay Mine

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
Hotwired
First Sergeant 3
First Sergeant 3
Posts: 2599
Joined: Fri Oct 13, 2006 5:51 am
Location: UK

Tue Feb 13, 2007 6:26 pm

A pull out hook huh?

I can put a picture to that.

A spring loaded blowgun sprung to open and held back with a pin.

Pull the pin, the blowgun lever snaps to the open position and pilots a small, short barreled pneumatic cannon that blasts baby powder over you.

Not a bad idea noname :D
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Tue Feb 13, 2007 6:49 pm

noname wrote:Hah! I have beaten your idea. Gimme a week to make and post it, it's even simpler, activated by a hook that you pull out, and it's more compact. And still in the under $10 range! I'm going to make at least 4 of these.
No one ask for a diagram, I WON'T make one.
Patience is a virtue.
Sounds good. Can't wait.
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Tue Feb 13, 2007 6:51 pm

Sounds like you’re planning on throwing a full-blown cannon at people…

Why not make a swivel gun, or an off route mine? Anybody considered making a bushmaster for paintball? And what bout the good ole IED (cheap paint grenade modified to be triggered be a tripwire)?
But since y’all want a hand grenade, try using a triggered burst disk and a “Ketcham” (Google it) style hand grenade.
Call me "Judge", it's easier to type.

Spud gun safety rules
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Wed Feb 14, 2007 8:25 pm

I googled it and kept getting results for some book.
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Wed Feb 14, 2007 8:33 pm

My grenade is done!
Except I need to go to Ace again to pick up some sheet rubber that's more flexible than the stuff I have now. It works, but the diaphragm flexes back only about 3/16."
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Wed Feb 14, 2007 8:42 pm

So does it have an effective delay?
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Wed Feb 14, 2007 8:51 pm

I need a smaller hook with less threads. The grenade usually goes off when I'm about 2/3s done unscrewing the hook, which is about 3 seconds.
So the delay is good, I just need to put the hook in not as far, but then there's the chance of it getting shot out at me at 120 psi (that's no fun!).
I'll get a couple pics tomorrow, or sometime this week.
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Feb 14, 2007 9:00 pm

PVC Arsenal 17 wrote:I googled it and kept getting results for some book.
Ketcham’s grenade was a civil war era hand grenade that looked a lot like a NERF pocket football (the kind people use for anti-amour rounds in paintball) it had a cast iron body and fins made from pasteboard, it had a nipple ( a short piece of pipe that a percussion cap slips on) on the nose, a cap slipped over the nose that gave it a greater chance of striking the primmer when the grenade hit the ground, when the grenade was thrown and it hit the ground the cap was forced in to the percussion cap which in turn detonated the grenade, my explanation most likely sucked, as they usually do… give me a minute and I’ll se if I can’t get a picture.

Edit:
Found a page that has a pic.
Call me "Judge", it's easier to type.

Spud gun safety rules
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Wed Feb 14, 2007 10:11 pm

I lied.
I was bored and thought I might as well make a diagram...
Attachments
If you can't figure it out.....wow
If you can't figure it out.....wow
Air Nade.JPG (6.91 KiB) Viewed 2516 times
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Feb 14, 2007 10:18 pm

Yes, well, it’s nice… I guess…

But here’s my design:
Attachments
Ketcham's style paint granade
Ketcham's style paint granade
Call me "Judge", it's easier to type.

Spud gun safety rules
User avatar
zeigs spud
Corporal 2
Corporal 2
Posts: 657
Joined: Tue Apr 04, 2006 10:39 pm

Wed Feb 14, 2007 10:30 pm

jjk92 wrote:
Chimps wrote:
zeigs spud wrote:here is my idea for a new pressure activatem mine you could make...
Image

grey-activation pad
blue-pressure chamber
pink-blow gun addached to the activation pad
red-moded sprinkler valve
green-baby powder
wow... im speechless. you know that someone would have to be pretty stupid to walk right up to it while youre waiting to pull the trigger.

you could easily make a land mine like that one person said with my idea too.
umm yeah im pretty sure that you step down on the pressure activation pad so you dont stand there and pull the trigger......
yay the billionth person smarter than a damn monkey!

god judgement arms i'm srry for saying u were in a bad mood before with this guy..he's liek a 4 year old.

but yes steping on the pad activates it.
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Wed Feb 14, 2007 10:48 pm

Does your little insignia mean I can call you JA? :D
Good design also, but I think that type of grenade would be better suited to be fired from a grenade launcher. It would also be a much harder build (in my opinion).
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Feb 14, 2007 11:34 pm

Noname, NO it does not mean you can call me “JA” it’s a logo, not a nickname. It won’t hurt you to type it all, I type your name.
As for my design, if I didn’t have so many other projects, i.e. my paintball long gun and my auto-cannon, I would make one, it’s not that complex. And it would work fine as both cannon round and hand grenade.
Call me "Judge", it's easier to type.

Spud gun safety rules
User avatar
paaiyan
First Sergeant
First Sergeant
Posts: 2140
Joined: Wed Dec 27, 2006 10:03 pm
Location: Central Oklahoma
Been thanked: 1 time

Wed Feb 14, 2007 11:36 pm

I like that idea of yours judgement_arms. I might try that myself seeing as I have jsut about all those parts lyong around. And I'm already planning on paintballing this weekend. Hmm...
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Feb 14, 2007 11:45 pm

Paaiyan, are you even going to ask before you copy MY design?
Call me "Judge", it's easier to type.

Spud gun safety rules
Post Reply