P.S. for anyone who is interested it is a Traxxas Stampede. no upgrades
remote ignition for combustions
-
Specialist
- Specialist 3
- Posts: 375
- Joined: Sun Mar 18, 2007 4:22 pm
- Location: Illinios
- Contact:
im thinking about putting a mini cannon on my rc car. its ok if it is kinda heavy this is a hobby car built to last. it goes up to about 25 mph so it can carry relatively heavy loads. does anyone know of some remote ignition systems? let me know if you do.
P.S. for anyone who is interested it is a Traxxas Stampede. no upgrades
P.S. for anyone who is interested it is a Traxxas Stampede. no upgrades
what, you mean those big black electric motors? that would weigh at least 20 pounds? or are you talking about something else?benstern wrote:or garage door opener to fire a stungun.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
-
Specialist
- Specialist 3
- Posts: 375
- Joined: Sun Mar 18, 2007 4:22 pm
- Location: Illinios
- Contact:
@ hi that could work, i have and extra servo or two os i can see what i can do the servos i have. they are steering servos but i could figure something out.
-
Brooner115
- Specialist
- Posts: 117
- Joined: Sat Jan 27, 2007 3:07 pm
Dude your into hobbie trucks too sweet I have a Traxxas T-maxx that goes up to 70 mph I put like $200 into it after I bought its a beast 
What kind of truck (or car) do u have?
What kind of truck (or car) do u have?
-
Specialist
- Specialist 3
- Posts: 375
- Joined: Sun Mar 18, 2007 4:22 pm
- Location: Illinios
- Contact:
i have a upgrade free Traxxas Stampede. and it sees a ton of air when its running.
and it sees a ton of air when its running.-
SpudBlaster15
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:23 pm, edited 1 time in total.
Specialist if you are looking into using a 3rd channel to run an ignition source i have a Hitec Lynx 3D remote that i am selling since i don't race any more im trying to sell off all my RC equipment. If you would be interested you can email me at Dirttracker46@comcast.net
-
Specialist
- Specialist 3
- Posts: 375
- Joined: Sun Mar 18, 2007 4:22 pm
- Location: Illinios
- Contact:
ok. thanks for the offer ill think about that. i have a Traxxas Stampede though. will it work with my truck or do i have to buy a new ESC?
-
SpudBlaster15
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:23 pm, edited 1 time in total.
-
Specialist
- Specialist 3
- Posts: 375
- Joined: Sun Mar 18, 2007 4:22 pm
- Location: Illinios
- Contact:
i might do that and buy a new ESC so i can buy my cousin's motor. i forgot that kind but i think it is a havok 15 turn.
P.S. im gana make a thread on off - topic for people who want to talk about their rc cars.
P.S. im gana make a thread on off - topic for people who want to talk about their rc cars.
torque on your servos might be a problem. I graduated from cars into helicopter and managed to combine it with model rocket firing. but that was much easier considiring the button had significantly less resistance.
Depending on what kind of transmitter you use, (I use a futaba 9c), you could program one of the many extra levers or buttons for things meant for engine kill to make your servo go, which in turn, will make your ignitor click. (I think)
if the servo is not strong enough, you could try an alternate method, such as attaching a battery, with alligator clips on both ends of the wires, and mount one inside your chamber, and also mount the servo with the other alligator clip attached to the servo arm inside the chamber, and make it so that when you move your lever or switch, the two wires come cose enough inside your barrel to make conduction. hence a spark. just an idea. the only problem I see is your servo getting torched.
Depending on what kind of transmitter you use, (I use a futaba 9c), you could program one of the many extra levers or buttons for things meant for engine kill to make your servo go, which in turn, will make your ignitor click. (I think)
if the servo is not strong enough, you could try an alternate method, such as attaching a battery, with alligator clips on both ends of the wires, and mount one inside your chamber, and also mount the servo with the other alligator clip attached to the servo arm inside the chamber, and make it so that when you move your lever or switch, the two wires come cose enough inside your barrel to make conduction. hence a spark. just an idea. the only problem I see is your servo getting torched.
-
shud_b_rite
- Specialist 2
- Posts: 290
- Joined: Tue Jan 30, 2007 7:10 pm
- Location: Auckland, New Zealand
Heres another idea for ya.
Buy a wireless doorbell from somewhere, rip out the speaker (or peizo) on the receiver and replace it with a small relay that is wired to your ignition source.
I did this to our garage door in our old house because we lost the remote for it. Works well
Buy a wireless doorbell from somewhere, rip out the speaker (or peizo) on the receiver and replace it with a small relay that is wired to your ignition source.
I did this to our garage door in our old house because we lost the remote for it. Works well
Airbeds... so many different uses