peace-strike that, chaos
My First (working) Pison Gun!!!
-
turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
this is my third attempt at a pison gun. it will fire a cup full of dirt through a fence board but that is all the testing that ive done so far. I literally just fired it like two minutes ago. pistons rock!!!
peace-strike that, chaos
peace-strike that, chaos
- Attachments
-
- there she is, four feet of four inch amaisingness!!, yes amaisingness is a word
-
- this is my cusom piston (about an hour in the drill press)
-
- dosnt that four inch look beautiful
-
shud_b_rite
- Specialist 2
- Posts: 290
- Joined: Tue Jan 30, 2007 7:10 pm
- Location: Auckland, New Zealand
Man, that is pretty awesome. I tried making a piston like that but it leaked too much. Does yours leak at all?
Airbeds... so many different uses
-
turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
it leaks a bit out the barrel but its not drasic
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Nice, now just hack off the end of that bolt to make it just that little bit lighter and more efficient 
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
mabe some day
procrasinators of the world unite-tomorrow
procrasinators of the world unite-tomorrow
-
keep_it_real
- Specialist 3
- Posts: 320
- Joined: Sat Dec 23, 2006 4:41 pm
- Location: Bend, Oregon
Did you just spin the piston around on the drill press? What is the made of?
Cut some holes at the end of the barrel so it looks like a muzzle break.
Verry nice
Cut some holes at the end of the barrel so it looks like a muzzle break.
Verry nice
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
Considering the muzzle is inside the chamber, I don't think that would be the brightest of ideaskeep_it_real wrote:Cut some holes at the end of the barrel so it looks like a muzzle break.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Nor would cutting holes in the outside tube which is the chamber 
-
super spuder
- Corporal
- Posts: 558
- Joined: Fri Apr 06, 2007 9:05 pm
- Location: Ontario Canada
yea, it might leak a little bit then 
-
mega_swordman
- Corporal
- Posts: 526
- Joined: Wed Nov 29, 2006 2:37 pm
- Location: Bay Area, California
- Contact:
Very nice. Good job :thumbup:. One question though, did you say it can shoot DIRT through wood. Or rather is it the cup full of dirt going through wood. Regardless, the gun sounds beastly.
"Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity." George S. Patton
-
turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
it will shoot a cup full of dirt through plywood
and to answer keepitreal's question it is a three inch cap that i drilled a hole of in the center an the used a grinder to remove a little plasic while the drill press was moving
and to answer keepitreal's question it is a three inch cap that i drilled a hole of in the center an the used a grinder to remove a little plasic while the drill press was moving
-
iknowmy3tables
- Staff Sergeant
- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
thats pretty awesome, but I have yet to see applesauce pierce plywood
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
hehe nice gun..who fires dirt out of there gun other than this guy..its a first...i here by pronounce u to have found the ghettoist of ammos...
anyway yea my first piston leaked out the barrel a bit to so when i went to shoot water out of it i had a sabot that was perfect in the barrel it was a peice of foam i rammed in there..all of the sudden it started building pressure in the barrel because it was blocking all air and then as i was pouring the water down the barrel the foam peice shot out at me...now it didnt hurt because it was foam but it scared the shat out of me because it was loud as hell...
^^^ dont read if u dont like randomness...
anyway yea my first piston leaked out the barrel a bit to so when i went to shoot water out of it i had a sabot that was perfect in the barrel it was a peice of foam i rammed in there..all of the sudden it started building pressure in the barrel because it was blocking all air and then as i was pouring the water down the barrel the foam peice shot out at me...now it didnt hurt because it was foam but it scared the shat out of me because it was loud as hell...
^^^ dont read if u dont like randomness...
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
-
homeflake210
- Private 3
- Posts: 50
- Joined: Mon Sep 25, 2006 6:33 pm
heh, I fire dirt out of my gun all the time lolspudthug wrote:hehe nice gun..who fires dirt out of there gun other than this guy..its a first...i here by pronounce u to have found the ghettoist of ammos...
Kenny_McCormic wrote:when asking the keywords to use are "firearm" and "airgun"
ifyou call and say, yo waazup cani bring my extra big ass cannon my trip in the plane? you will get a definent NO!