Throwbag Cannon

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Aaroneous
Private
Private
Canada
Posts: 4
Joined: Thu Mar 24, 2022 12:01 pm
Has thanked: 1 time
Been thanked: 4 times

Thu Mar 24, 2022 12:11 pm

Built this for my volunteer FD. We're going to be using it to launch a throwline over a roof and pull over an anchor rope when dealing with flue fires next season.

Image

Image

Image

Image

Image
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1080
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 69 times
Been thanked: 96 times

Fri Mar 25, 2022 7:33 pm

Is that ABS ? what psi do you run in it ?
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 37 times
Been thanked: 20 times

Sat Mar 26, 2022 7:50 am

always nice to see practical applications
Aaroneous
Private
Private
Canada
Posts: 4
Joined: Thu Mar 24, 2022 12:01 pm
Has thanked: 1 time
Been thanked: 4 times

Tue Mar 29, 2022 6:21 am

farcticox1 wrote:
Fri Mar 25, 2022 7:33 pm
Is that ABS ? what psi do you run in it ?
Yes. Still working it out, but 100 was WAY too much... Would have cleared a six story building with room to spare.

... Home depot was out of pvc.
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1080
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 69 times
Been thanked: 96 times

Tue Mar 29, 2022 3:40 pm

[/quote]

Yes. Still working it out, but 100 was WAY too much... Would have cleared a six story building with room to spare.

... Home depot was out of pvc.
[/quote]

Good job, PVC is not rated for gas pressure.
User avatar
Moonbogg
Staff Sergeant 3
Staff Sergeant 3
United States of America
Posts: 1733
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Has thanked: 158 times
Been thanked: 100 times

Tue Mar 29, 2022 9:11 pm

PVC vs ABS crush test


PVC air pressure failure


ABS air pressure failure


ABS wins.
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1080
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 69 times
Been thanked: 96 times

Wed Mar 30, 2022 6:29 pm

Interesting that DWV which has no actual pressure rating is better at using for pressure applications than PVC which actually has a pressure rating but is not actually rated for gas pressure. :?
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 37 times
Been thanked: 20 times

Sat Apr 02, 2022 7:46 pm

More important for me is the failure mode. PVC makes sharp shrapnel, most ABS yawns or makes squared off pieces.
Post Reply