6mm semi - added trigger & mag!

[littlebro05]

I didn't realise it before 0.5L at 7.5bar (I think about 50psi'ish) 95 shots.

Not quite. 7.5 bar is just under 110 psi. Still very impressive, but not quite as efficent as you thought.

Haha, oh well I was totally off, about Ant's Gun how much pressure can a plastic coke bottle handle before it explodes. Just so I know not to pump it too much or else boom! possible injuries. Well yeah cool

[Antonio]

Haha, oh well I was totally off, about Ant's Gun how much pressure can a plastic coke bottle handle before it explodes. Just so I know not to pump it too much or else boom! possible injuries. Well yeah cool

Well I am telling you its good man! I mean you can even pump it up with a bikepump or something. Oh yeah I did testing at what pressure coke bottles explode. The think walled ones (1.5L) blows at 23 bar, I am not sure about the thinwalled ones. I once did blow up a thickwalled 1.5 liter bottle bc I put fuel and acetone in it for other use. This made the bottom really weak, and while I was shooting the bottom shot off. The bad thing was that I was using the bottle as stock:S So yeah never put anything into a bottle except air, so you know what ur handling (btw the bottle with weak bottom was pumped to only 8 bars).

[Mr.Sandman]

is it possible to make an adapter for co2 work with this because ive heard that high pressure c02 is more dense than air and will give you a faster shot. but even so you could make a hammer valve like ant and have an automatic

edit: wow i just realized how bad my punctuation is. i even forgot to use spellcheck

[Carlman]

is it possible to make an adapter for co2 work with this because ive heard that high pressure c02 is more dense than air and will give you a faster shot. but even so you could make a hammer valve like ant and have an automatic

given the same pressure air will give more powerful shot over c02.

you heard wrong.

[Mr.Sandman]

is it possible to make an adapter for co2 work with this because ive heard that high pressure c02 is more dense than air and will give you a faster shot. but even so you could make a hammer valve like ant and have an automatic

given the same pressure air will give more powerful shot over c02.

you heard wrong.

thanks for the info. I will now go hit myself with a hammer

[MrCrowley]

Because CO2 is denser, it is heavier then air. Meaning it will travel slower then air and therefore be less powerful given both have been applied the same amount of energy.

[Antonio]

Because CO2 is denser, it is heavier then air. Meaning it will travel slower then air and therefore be less powerful given both have been applied the same amount of energy.

Doesn't co2 expand at a faster rate though? And you are talking about the same energy, but that doesnt mean that they have the same pressure right? Co2 doesnt need a regulator.

[THUNDERLORD]

I was thinking about this old link: how- to refillable co2 cartridges
Anyway, I was thinking of the refillable co2 cart. except the round end would be sawed off and the shrader with internals removed, Would make the blow-forward chamber encasing the spring and bolt.

I was thinking a bicycle tire fill (valve modded slightly) would be attached onto the shrader of the modified refillable co2 cart. (blow forward bolt case).

I was wondering if the tire fill was upside down or inverted and liquid co2 entered the blow forward bolt, couldn't a certain spring be used that would remain closed until the co2 vaporizes (thus expanding and pulsing the bolt)?

Hope I haven't rambled too much, but I don't have much time right now.
Thanks I'll have to check back later. 8)

[Young]

I believe I messaged you on youtube about this, if you dont mind may I try this and tweak some of the design?

[jackssmirkingrevenge]

I believe I replied to your msg, and tweak to your heart's content

[kuya]

Whats the diametre of the Syringe and how stiff is the spring? Im thinking of making a metal breech exactly the same. Im planning to make the spring quite stiff in order to have more pressure build up inside the chamber and blow off a more powerful shot. Will this work or will the gas just take longer to come out (8 gram n2o setup).

[jackssmirkingrevenge]

The syringe diameter was far too great for my purposes, you could get by with 1/2" diameter, especially if you're using high pressure.

[kuya]

Half Inch Diameter? That seems a bit small considering the OD of my barrel. But your the master =P. I just dislike tampering with small things lol, but I have to put up with it for this hobby =].

[Ragnarok]

Half Inch Diameter? That seems a bit small considering the OD of my barrel.

If your barrel diameter is larger than Jack's, you will need to scale that size, but roughly twice the barrel ID should easily be sufficient for relatively small bores like this.

Larger sizes of blow forward bolt probably won't need quite that much.

[jackssmirkingrevenge]

It's a question of spring stiffness really. A weak spring doesn't need a big piston at all, much less if used in conjunction with an efficient valve.